Tips

Tip and Tricks

12 may 2011

Where do I find my PIN and IMEI?

From BlackBerryFAQ

Method 1

1. Go to Options

2. Select Status
Images:

Method 2

Hold down ALT and shift (CAP or NUM) and ‘H’

(full keyboard models only)

How to Unlock Your Blackberry Free By Your Wireless Carrier

Posted: 27 Feb 2009 10:18 PM PST

How to Enter Unlock Codes on BlackBerry 8800 Pearl:

***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****

1. Go to settings menu => and then Options
3. Select Advanced options => and then Sim card
5. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
6. Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
8. You should be presented with a prompt “Enter Network MEP Code”. Type in the 16 digit unlock code received from NewMobileFreedom.com and press in the track wheel / jog dial to confirm
9. Your phone is now unlocked

Blackberry 8100 Unlock Code Entry Instructions

How to Enter Unlock Codes on BlackBerry 8100 Pearl:

1. Go to Options Menu => Advanced Options
2. In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
3. You’ll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2 (*You won’t see any text while you are typing either one of these.)
4. Enter the unlock code.

Blackberry 8700 Unlock Code Entry Instructions

How to Enter Unlock Codes on BlackBerry 8700:

8700c Unlocking Info

***** You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an AT&T or Cingular Sim card in the phone ( Can be active or inactive ) Make sure the phone is not displaying the low battery warning! *****

1. go to settings
2. go to options
3. go to advanced options
4. go to sim card
5. Type MEPD (not case sensitive) (you will not see text appear on screen while typing)
6. Does it say Network active? if so your phone is locked
7. Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing)
8. It will say “Enter Network MEP Code, then you type in the 16 digit unlock code, press in the jog dial to confirm.
9. Your phone is now unlocked

BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc.. Unlock Code Instructions

How to Enter Unlock Codes on BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc..

1. Select Options menu on BB.
2. Now you select SIM CARD menu. To be able to see this you have to type this on the keypad on phone : (TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code)
3. Type ‘MEPD’ for all models except 7100 in which case in case use ‘MEPPD’.
4. Usually u should see “active” NET lock. Now in order to disable this lock type ‘MEP2′ respectively ‘MEPP2′ if phone is 7100 and will appear a dialog asking for code.

NOTE: You must use the “alt” or “shift” key to enable numbers so example would be: m-e-p-”alt key”-2 Now you should see the place to enter your net unlock code.(if not, you didn’t type in mep2 or mepp2 properly.)

5. Here you must enter the “NET Unlock Code” that the bb unlocker showed you and hit return.

BlackBerry IMEI Unlock
Unlock your GSM Rim BlackBerry Cell phone by remote imei code. Just enter your unlock code. It couldn’t be easier! Just 3

Easy Steps!

1. Add your phone(s) to cart and click the yellow paypal checkout button.
2. Use the login your sent automatically to submit your phone info.
3. Enter the code to unlock your cell phone using the instructions we provide.

$13.99 AT&T Cingular BlackBerry IMEI Unlock -
Unlock your AT&T Cingular right from your home when you purchase this AT&T Cingular IMEI unlock code!


Click here to view more details


$19.99 T-Mobile BlackBerry IMEI Unlock -
Unlock your T-Mobile BlackBerry right from your home when you purchase this T-Mobile IMEI unlock code!


Click here to view more
details


$39.99 Unlock any BlackBerry from any GSM Provider by imei code.
Just enter the unlock code. no pc needed. It couldnt be easier!
Now unlocking these Rim BlackBerry Cell phone Providers

From Indonesia we support Unlock XL Blackberry, Indosat Blackberry, Telkomsel Blackberry

Click here to view more details

How to Enter Unlock Codes For All Other BlackBerry

BlackBerry (models not listed above) 1 – Using the menu go to Settings Menu -> SIM card pressselect. 2 – While holding the SHIFT key, type mepd 3 – You should now see the five locking categories listed. 4 – While holding the SHIFT KEY, type mep2. 5 – Release the shift key. 6 – You are now prompted to enter the Network MEP code (it will also state how many attempts left) 7 – Enter the code 8 – Enter Return/Enter 9 – The device should then be unlocked

Unlock for BlackBerry from Any Provider
Click here to view more details

BlackBerry 8700 Unlock Code Instructions

Blackberry 8700 Unlock Code Entry Instructions. 8700c Unlocking Info ***** You must have a SIM card in your phone to complete these steps, Make sure the phone is not displaying the low battery warning! ***** go to settings go to options go to advanced options go to sim card Type MEPD (not case sensitive) (you will not see text appear on screen while typing) Does it say Network active? if so your phone is locked Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing) It will say “Enter Network MEP Code, then you type in the unlock code, press in the jog dial to confirm. Your phone is now unlocked

How to Enter Unlock Codes For BlackBerry 8300 8800

Blackberry 8800 8300 Curve Unlock Code Entry Instructions How to Enter Unlock Codes on BlackBerry 8800 8300 Curve: ***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) ***** 1. Go to settings menu => and then Options 2. Select Advanced options => and then Sim card 3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD) 4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD) 5. You should be presented with a prompt “Enter Network MEP Code”. Type in the unlock code received from unlockmotorolas.com and press in the track wheel / jog dial to confirm 6. Your phone is now unlocked

How to Enter Unlock Codes For BlackBerry 8100 Pearl

Blackberry 8100/Pearl -simcard must be inserted -Wireless must be off. How to turn Wireless Mode Off: 1. Scroll to (Turn Wireless Off.) 2. Press Select. 3. Wireless Mode will turn off. How to Enter Unlock Codes on BlackBerry 8100 Pearl: Step Action 1 Insert SIM into device 2 Power phone on and Turn off the radio (Turn Wireless Off option) 3 Select “Options” THEN SELECT ADVANCED OPTIONS 4 Scroll down and select “SIM Card” 5 Type “MEPPD” (please note that you will not see what you type on the screen) 6 Type “MEPP then [ALT BUTTON] then 2″ (please note that you will not see what you type on the screen) 7 Enter the Unlock Code 8 Press enter 9 Reboot device. Device is now unlocked. Alternate Instructions if above fails 1 – While on the home screen, click the .blackberry key. on keyboard, then select .options.. 2 – Choose .Advanced Options.. 3 – Select .Sim Card. 4 – (There is no area to type the following letters, you just type them as instructed. No need to hit keys twice to get a letter either.) Type m e p p d to display the first five levels of SIM locking. Most companies use network locking so the Network should display Active. All other states should display Disabled ( you will not see text appear on screen while typing ) 5 – Type m e p p 2 to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2) ( you will not see text appear on screen while typing ) 6 – Input the SIM Unlock code 7 – Press in the trackball in once Your phone is unlocked *note: in step 4 or 5, if typing m e p p d or m e p p 2 didn’t do anything, try holding down the shift (right of the zero, cap) and pressing meppd Alternate Instructions if above fails 1 – This can be done with or without sim card. 2 – Go to Options Menu => Advanced Options. 3 – Go to Sim Card Menu 6 – Now Type MEPP2 (Press, and hold the ALT key while typing 2. you will not see anything on screen while typing. ALT key is beside * key, symbol like arrow key.) 7 You will see “Enter Network MEP code (number of attempts left will appear in brackets). 8. Enter your Network MEP code (unlock code) GsmFather server provided, than press enter. 10. You will see “Code Accepted.” 11. You have permanently unlocked your BlackBerry. 12. Power off your BlackBerry, than insert your desired SIM card.

How to Enter Unlock Codes For BlackBerry 7100 7130

BlackBerry 7100/7130 Unlock Code Instructions To Unlock: 1. On the Home screen, click the Tools icon. The Options screen appears. 2. In the tools screen, select the Settings icon. 3. Scroll to SIM Card and select it. You should see the phone number and the SIM ID number. 4. Type .mepp2′ to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2) ( you will not see text appear on screen while typing ) 5. Input the SIM Unlock code 6. Press in the jog dial once

How to Enter Unlock Codes For BlackBerry 5xxx 6xxx 7xxx

BlackBerry 5xxx, 6xxx, 7xxx Unlock Code Instructions 5***, 6***, 7*** ( Except for 7100 ) 1. go to options 2 scroll to SIM CARD then press jog dial in once to select it 3. Type MEPD (not case sensitive) ( you will not see text appear on screen while typing ) 4. Does it say Network active? if so your phone is locked 5. Press and hold the alt key (half moon looking key on the lower left side) 6. as you are holding the alt key type in MEPE (not case sensitive) ( you will not see text appear on screen while typing ) 7. type in the unlock code when prompted 8. After entering the code press the jog dial in 9. Your phone is now unlocked

Blackberry OS 4.5 Update

Popularity: unranked [?]